8
Turn the DIAL and set the far left digit.
You can set the speed to any value between 1 and
3000.
Tip
To change the unit of distance, go to [10 APRS] → [11
APRS UNITS].
9
Press
[
The cursor will shift to the right.
Tip
Press
[
Press
[
10
Turn the DIAL and set the next digit.
11
Press
.
12
Turn the DIAL, select [9 ALT.NET], press
select ON or OFF.
Pressing
13
Press
for one second or longer.
The filter will be set and the display will return to the previous screen.
Tip
Factory default settings: 1 Mic-E: ON
Inputting standard message text
Eight types of standard messages containing a maximum of 16 characters can be
created and registered. These can be pasted from the message editing screen and then
transmitted.
Please refer to "Using standard text" (
Turning the APRS function ON/OFF
This sets the APRS function ON or OFF.
Please refer to "Activating the APRS function" (
APRS operating band mute setting
The receive audio (beacon and voice etc.) of the APRS operating band can be muted.
1
Press
for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
].
] → The cursor will shift to the left.
] → The cursor will shift to the right.
turns this function ON and OFF.
2 POSITION: ON
3 WEATHER: ON
4 OBJECT: ON
5 ITEM: ON
6 STATUS: ON
7 OTHER: OFF
8 RANGE LIMIT: OFF
9 ALT.NET: OFF
Using the APRS set-up menu
, then
P.48) for the details.
P.12) for the details.
.
59