Setting The Skip Band; Changing The Frequency Step; Change The Frequency Display Color Of The Operation Band - Yaesu FTM-200DR Operating Manual

Setting the Skip Band

Set the band selected when the [BAND
frequencies in the memory channel before setting the band skip, can be recall the memory
that stores the frequencies of the bands that cannot be selected.
1. Press and hold the [BAND
2. Rotate the DIAL knob to select the band to set and press
the DIAL knob.
Or press and hold the [F menu] key → [22 BAND SKIP]
3. Rotate the DIAL knob to set "ON" (selectable) or "OFF"
(not selectable).
4. To return to the normal operation screen from the Function
List, press a key other than the power switch or PTT.

Changing the Frequency Step

The DIAL knob rotation frequency step may be changed. Normally, use the factory
default setting of "AUTO".
1. Press and hold the [F
2. Rotate the DIAL knob to select [31 STEP], then press the
DIAL knob.
3. Rotate the DIAL knob to set the frequency step.
4. To return to the normal operation screen from the Function
List, press a key other than the power switch or PTT.
• The default setting, of the frequency step is set to "AUTO", which automatically provides a
suitable frequency step according to the frequency band.
• The frequency steps that can be selected depend on the frequency band.

Change the frequency display color of the operation band

The display color of the frequency of the operation band can be selected from "white",
"blue", and "red".
1. Press and hold the [F
2. Rotate the DIAL knob to select [3 FREQUENCY COLOR],
then press the DIAL knob.
3. Rotate the DIAL knob to select the display color.
"WHITE"  "BLUE"  "RED"
4. To return to the normal operation screen, press a key
other than the power switch or PTT.
30
GRP
] key in VFO mode.
GRP
] key.
MENU
] key.
MENU
] key is pressed. By storing frequently used
Press and hold
Press and hold