Power Standby/On Operations; Turning The Power On And Standby Mode - Panasonic SL-PR300 Operating Instructions Manual

SL-PR300EB.fm Page 13 Thursday, September 20, 2001 5:01 PM

Power STANDBY/ON Operations

Turning the Power On and
Standby Mode
STANDBY/ON
( )
0
COMPACT DISC RECORDER SL-PR300
3
DISC
2
DISC
1
DISC
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
p
DISC SELECTOR
CD1, CD2, CD3
CD1
CD REC CD EDIT
1
4
7
0
PLAY
MODE REPEAT
•
REC
REC MUTE
COMPACT DISC RECORDER
To turn power to the unit on
Press the STANDBY/ON
remote control.
Main Unit
• The currently selected CD function is shown in the information
display.
To put the unit in standby mode during operation
Press the STANDBY/ON
remote control.
Main Unit
0
DISC SELECTOR 1, 2, 3
MULTI JOG
REC LEVEL
– +
OPEN / DISC
CLOSE SELECTOR
OPEN /
3 CLOSE
2
DIGITAL CD LINE REC SELECTOR
MIX BALANCE
1
LINE CD
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
p
CD2 CD3 STANDBY/ON ( )
FINALIZE DISPLAY
2 3
5 6
8 9
_ > 10
CONTROL
CD CD-R/RW
FADE SYNCHRO
p
+
PITCH
SET
PITCH–
RAK-PR300
( ) button on the front panel or
Remote Control
( ) button on the front panel or
Remote Control
• The clock display is shown in the information display. It flashes
if the clock has not been set.
If the STANDBY/ON ( ) button is pressed during a record-
ing operation, the standby lamp flashes while the unit brings the
operation to an end. Once the operation has stopped, the unit enters
the standby mode and the standby lamp lights steady. From the
time the button is pressed until the standby lamp lights steady, the
unit will not respond to any button pressed on the front panel of the
main unit or remote control.
Turning the power on by pressing a function
button when the unit is in the standby mode
The unit can be turned on and a function selected simply by press-
ing one of the buttons shown in the figure below
Function
Main unit The function is set to 3-CD
changer. The CD PLAYER
3
indictor is shown in the dis-
play window.
2
If one of these buttons is
pressed when a CD is in the
1
3-CD
corresponding CD tray, contin-
changer
uous play starts from the CD
tray corresponding to the but-
ton pressed.
Remote control
These buttons do not function
CD1 CD2 CD3
during program and random
play modes.
Main unit
The function is set to 3-CD
(3-CD control)
3-CD changer. The CD PLAYER
changer indicator is shown in the dis-
play window.
Main unit
The function is set to CDR.
(CDR control)
The CD RECORDER indica-
CDR
tor is shown in the display
window.
• When the PLAY p button for either the 3-CD changer or CDR
is pressed on the main unit, the power is turned on and the cor-
responding tray is selected. If a disc is loaded in the selected
tray, playback begins.
• When one of the 3-CD changer OPEN/CLOSE 0 buttons or the
CDR OPEN/CLOSE 0 button is pressed, the power is turned
on and the tray opens, but the currently selected function (3-CD
changer or CDR) does not change.
• If the power cord is unplugged from the wall socket for more
than a few seconds, the internal clock, program, etc. of the main
unit may require resetting. When this occurs, please set the
clock (and timer functions) again.
Operation
RQT6091