ACME XA-400 SPOT PRO User Manual page 9

No (normal) or Yes (tilt inverse), press the ENTER button to store. Press the MENU button back
to the last menu or let the unit idle one minute to exit menu mode.
P/T Feedback
To select P/T Feedback, press the ENTER button to confirm. Use the UP/DOWN button to
select No (Pan or tilt's position will not feedback while out of step) or Yes (Feedback while
pan/tilt out of step), press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to confirm. Use the DOWN/UP button to
select the Linear(Mode1) or Square law (Mode 2) o Inv SQ law (Mode 3) or S Curve (Mode
4). Once the mode has been selected, press the ENTER button to setup, to go back to the
functions without any change press the MENU button again. Press and hold the MENU button
about one second or wait for one minute to exit the menu mode.
Dimmer Speed
To select Dimmer Speed , press the ENTER button to confirm. Use the DOWN/UP button to
select the Fast or Smooth. press the ENTER button to store. Press the MENU button back to
the last menu or let the unit idle one minute to exit menu mode.
Focus Compensate
To select Focus Compensate , press the ENTER button to confirm. Use the DOWN/UP
button to select the Disable , Near , Medium or Far. Once the mode has been selected, press
the ENTER button to setup, to go back to the functions without any change press the MENU
button again. Press and hold the MENU button about one second or wait for one minute to
exit the menu mode.
8B