Advanced Settings/Video Settings - Grandstream Networks GXV3240D Administration Manual

Offhook Auto Dial
Offhook Timeout (s)
Enable Function for Incoming
Call

ADVANCED SETTINGS/VIDEO SETTINGS

Video Frame Rate
Display Video Information
Enable Frame Skipping in
Video Decoder
Firmware Version 1.0.1.54
Configures a User ID/extension to dial automatically when the phone is
offhook. The phone will use the first account to dial out. The default
setting is "No".
If configured, when the phone is on hook, it will go off hook after the
timeout (in seconds). The default setting is 30. The valid range is from
10 to 60.
Defines the function for the incoming video call.The default setting "No"
means disable the function. If set to "Preview", users could tap on the
PREVIEW button in the call interface to check video caller without
answering the incoming video call.
Configures video frame rate for SIP video call from "5 frames/second",
"15 frames/second", "25 frames/second", "30 frames/second" and
"Variable frames rate". The default setting is 15 frames/second. The
video frame rate is adjustable based on network conditions. Increasing
the frame rate will significantly increase the amount of data transmitted,
therefore consuming more bandwidth. The video quality will be affected
due to packet loss if extra bandwidth is not allocated.
Configure whether to display video stream sending and receiving
information during video call. The default setting is "No".
Configure to enable frame skipping in video decoder. If enabled, the
video decoder will skip the P frame and start decoding from the next I
frame. Enabling this option will help reduce flickering in the video when
the bandwidth is limited in the network environment. The default setting
is "Yes".
GXV3240D Administration Guide Page 53 of 83