Table of Contents
Advertisement
Access Method
Port
Admin Password
Confirm Admin Password
User Password
Confirm User Password
MAINTENANCE/UPGRADE
Download Device
Configuration
Configuration via Keypad
Menu
XML Config File Password
HTTP/HTTPS User Name
HTTP/HTTPS Password
Upgrade Via
Firmware Server Path
Config Server Path
Firmware Version 1.0.1.54
The default setting is "No".
Allows users to select HTTP or HTTPS for Web Access. The default
setting is HTTP.
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for
customizing the web port.
Allows users to change the admin password. The password field is
purposely hidden after clicking "Save" button for security purpose. This
field is case sensitive with a maximum length of 32 characters. The
default admin password is "admin".
Type the new Admin Password again to confirm.
Allows the administrator to set the password for user-level web GUI
access. This field is case sensitive with a maximum length of 32
characters. The default user password is "123".
Type the new User Password again to confirm.
Click on "Download" to download the phone's config file in .txt format.
The config file in .txt format has the P value parameters for phone's
current settings except password for security purpose. Users can use
the Grandstream configuration file generator to generate binary config
file using this txt file.
Configure the access control for the users to configure from keypad
men. There are two different options: Unrestricted and Basic settings
only. If the phone enables the Basic settings only, the Advanced
settings options in Settings will be hidden.
The password for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML
configuration file.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Defines the server path for the firmware server. It could be different from
the configuration server for provisioning.
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
GXV3240D Administration Guide
Page 60 of 83
Advertisement
Table of Contents
