Table 15: Advanced Settings - Grandstream Networks GXP2000EXT Manual

Enterprise ip phones
Table of Contents

Advertisement

http://arttel.ru
HEADSET Key Mode
PC Port Mode
Advanced User configuration includes not only the end user configuration, but also advanced configuration
such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.

Table 15: Advanced Settings

Admin
Password
G723 rate
iLBC frame size
iLBC payload type
Silence Suppression
Grandstream Networks, Inc.
Select either "Default mode" or "Toggle Speaker(default)/Headset" or "Toggle
Speaker/Headset(default)".
In "Default Mode", only the speakerphone will ring for an incoming call. User can
use the headset key to pick-up, speak, and hang up calls through headset. The
headset icon will appear on the LCD when a call is in progress.
If "Toggle Speaker/Headset(default)"is checked, only the headset will ring for an
incoming call.
If "Toggle Speaker(default)/Headset" is checked, only the speakerphone will ring for
an incoming call but the user can make the phone rings using the headset by
pressing the HEADSET key while phone is idle. The headset icon will appear on
the idle LCD screen.
NOTE: This is not available for GXP2000
For GXP1200/GXP280 only. Default is 'Switch'. Choose to toggle between
Switch/Hub mode.
Administrator password. Only the administrator can access the "Advanced
Settings" and "Account Settings" page. Password field is purposely blank for
security reasons after clicking update and saved. The maximum password
length is 25 characters.
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
iLBC packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be
required.
Payload type for iLBC. Default value is 97. The valid range is between 96 and
127.
This controls the silence suppression/VAD feature of the audio codec G.723 and
G.729. If set to "Yes", when silence is detected, a small quantity of VAD packets
(instead of audio packets) will be sent during the period of no talking. If set to
"No", this feature is disabled.
GXP User Manual
Firmware 1.2.5.3
Page 31 of 44
Last Updated: 03/2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GXP2000EXT and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Gxp2010Gxp2000Gxp1200Gxp280Gxp285Gxp2020

Table of Contents