Grandstream Networks GXV3240D Administration Manual page 58

PC Port Priority Value
PC Port Mode
User-Agent
802.1x mode
Identity
MD5 Password
CA Certificate
Client Certificate
HTTP/HTTPS Proxy
Hostname
HTTP/HTTPS Proxy Port
Bypass Proxy For
Firmware Version 1.0.1.54
same as the VLAN tag value assigned to the PC port here.
Assigns the priority value of the Layer 2 QoS packets for PC port.
Configures the PC port mode. When set to "Mirrored", the traffic in the
LAN port will go through PC port as well and packets can be captured
by connecting a PC to the PC port. The default setting is "Enabled".
This is a configurable User Agent string used inphonebook and
screensaver downloading.
Allows the user to select 802.1x mode on the phone. The default
setting is "Disable".
Enter the Identity information for the 802.1x mode.
Enter the MD5 Password for the 802.1x mode.
Enter the CA Certificate for the 802.1x mode.
Enter the Client Certificate for the 802.1x mode.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets
to. The proxy server will act as an intermediary to route the packets to
the destination.
Specifies the HTTP/HTTPS proxy URL for the phone to send packets
to. The proxy server will act as an intermediary to route the packets to
the destination.
Defines the destination IP address where no proxy server is needed.
The phone will not use a proxy server when sending packets to the
specified destination IP address.
GXV3240D Administration Guide Page 58 of 83