Table of Contents
Advertisement
ADVANCED SETTINGS PAGE DEFINATIONS
ADVANCED SETTINGS/GENERAL SETTINGS
Local RTP Port
Use Random Port
Disable in-call DTMF display
Hide LDAP Contacts
Hide Call History
BS Call Log Update Interval
(s)
Keep-alive Interval (s)
STUN Server
Use NAT IP
SIP TLS Certificate
Firmware Version 1.0.1.54
Defines the local RTP-RTCP port pair used to listen and transmit. It is
the base RTP port for channel 0. When configured, for audio, channel
0 will use this port_value for RTP and the port_value+1 for its RTCP;
channel 1 will use port_value+4 for RTP and port_value+5 for its
RTCP. For video, channel 0 will use port_value+2 for RTP and
port_value+3 for its RTCP; channel 1 will use port_value+6 for RTP
and port_value+7 for RTCP. The default value is 5004. The valid
range is from 1024 to 65400.
When set to "Yes", this parameter will force random generation of both
the local SIP and RTP ports. This is usually necessary when multiple
phones are behind the same full cone NAT. The default setting is
"Yes".
Note:This parameter must be set to "No" for Direct IP Calling to work.
When it is set to "Yes", the DTMF digits entered during the call will be
hidden on the LCD screen. The default setting is "No".
When it is set to "Yes", the LDAP contacts will be hide from LCD
screen. Then end users can't access it
When it is set to "Yes", the Local Call History will be hide from LCD
screen. Then end users can't access it. If end users tap the Call
History app, it will enter the BraodWorks Xsi Call History.
Specifies how often the phone sends HTTP/HTTPS query to the
BroadWorks Xsp server to update the BroadWorks Call History. The
default setting is 1800 seconds.
Specifies how often the phone sends a blank UDP packet to the SIP
server in order to keep the "ping hole" on the NAT router to open. The
default setting is 20 seconds. The valid range is from 10 to 160.
The IP address or Domain name of the STUN server. STUN resolution
results are displayed in the STATUS page of the Web GUI. Only
non-symmetric NAT routers work with STUN. The default setting is
"stun.ipvideotalk.com".
Specify the NAT IP address used in SIP/SDP messages. This field is
blank at the default settings. It should ONLY be used if it's required by
your ITSP.
SSL certificate used for SIP TLS Transport.
GXV3240D Administration Guide
Page 51 of 83
Advertisement
Table of Contents
