Grandstream Networks GXV3240D Administration Manual page 56

Account
Name
UserID
MPK ID
Display Format
Note:
For more details on GXV3240D extension board (GXP2200EXT) and Multi-Purpose Key configurations,
please refer to the GXP2200EXT user manual in the website:
http://www.grandstream.com/support
Firmware Version 1.0.1.54

Call Intercom
Intercom/paging to the extension configured in UserID field.

Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured extension using account 2.

Dial DTMF
Dial the DTMF digits filled in UserID field during the call.

Eventlist BLF
Similar to the BLF option but in this mode the PBX collects the
information from the phones and sends it out in one single SIP
NOTIFY message. The PBX server has to support this feature.
When selected, eventlist URI needs to be filled out under web
GUI->Advanced Settings->MPK General Settings.

Call Park
Enter the UserID as the call park/pickup extension provided from the
PBX server to park or pick up the call. The PBX server has to
support this feature.
Selects the SIP Account used for the multi-purpose keys.
Configures the display name for the multi-purpose key.
Configures the UserID for the corresponding multi-purpose key mode.
This identifies the "MPK ID x" for "MPK x". The default number is from
1-160 for 160 MPKs in 4 GXV3240DEXT boards.
For example, if MPK 1's MPK ID is changed from 1 to 5, users will see
the configuration saved on MPK 5.
Configures the display format for the multi-purpose keys. Users could
select display "Name", "UserID", or "Name (UserID)". "Name" here
refers to the name saved in GXV3240D Contacts. The default setting is
"Name".
GXV3240D Administration Guide Page 56 of 83