Table of Contents
Advertisement
Localization Screen
Figure 7 - Localization Screen
Set the Site Supervisor's localization data such as language, date and
time formats, and engineering units from the Localization screen.
Language:
The default for the language selection is American English
(United States). The system stores a setting for the preferred system lan-
guage (internal language code). The default language is used when no
user is currently logged into the Supervisor or when the currently active
preferred language does not have a translation for a given label, prompt,
or display text.
Date:
The Date format can be set to either Day, Month, and full Year
(D-M-YR) or Month-Day and full Year (M-D-YR) format. The day, month,
and year values are separated by either a forward slash or a dash line
depending on user selection.
The Date Format can be changed based on user preference and saved to
user profiles. On initial Supervisor startup, the Date format defaults to
the format of the language selected. For example, en-US will default to
D-M-YR and all others will default to M-D-YR.
Time:
The Time format can be set to either a 12-hour (12-hr) format or
24-hour (24-hr) format. The hour, minute, and second values are
separated by either a colon or a period depending on user selection.
The Time format can be changed based on user preference and saved to
user profiles. On initial Supervisor startup, the Time format defaults to
the format of the language selected.
Date and Time delimiters default to forward slashes and colons.
Engineering
Units: The default engineering units are based on the
assigned units for the chosen preferred language. Users can choose or
change their preferred set of engineering units and save them to their
user profiles.
The default engineering units are based on the International System of
Units (SI System) format.
Set the system language type in the Language drop-down menu. Click
the right arrow > to save and proceed to the System Values screen.
Advertisement
Table of Contents
