Table of Contents
Advertisement
4.
Highlight the section Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5.
Click the Alternate Configuration tab and select Use the following IP address: and enter the determined IP address and the Subnet mask of the PC being
used on the Local Area Network or direct connection and click OK.
Note: Depending on the PC used, the operating system might need to be restarted for the IP address to take place. For an "out of the box" Site Supervisor, its IP address is
192.168.0.250, and use 192.168.0.251/255.255.255.0 for direct connections with a PC.
Figure 3 - Highlight Internet Protocol Version 4 (TCP/IPv4)
Figure 4 - IP Address and Subnet Mask
Advertisement
Table of Contents
