[Raster Position] - Panasonic PT-RQ13K Operating Instructions Manual

2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f [QUAD PIXEL DRIVE] is fixed to [ON] in the following cases.
g When the [POSITION] menu → [GEOMETRY] is set to anything other than [OFF]
g When [CUSTOM MASKING] in [BLANKING] is set to anything other than [OFF] ([PC-1], [PC-2], [PC-3])
To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product, consult
your dealer.
g While in the four-screen display mode
The four-screen display mode can be canceled by setting the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] to [OFF].
(x page 150)
f [QUAD PIXEL DRIVE] is fixed to [OFF] in the following cases.
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] or [AUTO(x4-speed)] and displaying an
image in simultaneous format
g When the focus test pattern is displayed using the [TEST PATTERN] menu
To enable the QUAD PIXEL DRIVE function while displaying the focus test pattern, set [QUAD PIXEL DRIVE] to [ON] again while
displaying the focus pattern.
f [QUAD PIXEL DRIVE] is fixed to [OFF] when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] or
[AUTO(x4-speed)] and displaying an image in simultaneous format while [QUAD PIXEL DRIVE] is set to [ON].
f [QUAD PIXEL DRIVE] is fixed to [ON] when the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF]
and displaying the four-screen display while [QUAD PIXEL DRIVE] is set to [OFF].
f [OSD SIZE] in the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] (x page 121) cannot be set when [QUAD PIXEL DRIVE] is set to
[ON].

[RASTER POSITION]

This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
1) Press as to select [RASTER POSITION].
2) Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3) Press asqw to adjust the position.
Note
f The range that can be moved is limited when the projected image is smaller than the display size of the menu screen (OSD).
Chapter 4 Settings — [ADVANCED MENU] menu
Enables the QUAD PIXEL DRIVE function.
Disables the QUAD PIXEL DRIVE function.
ENGLISH - 99