Panasonic PT-RQ13K Operating Instructions Manual page 107

g When [MULTI DISPLAY] → [MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen display
f The [SDI LINK] setting cannot be changed when [BACKUP INPUT MODE] in [BACKUP INPUT SETTING] is set as the combination used for
the SDI input equipped on the projector as standard.
f The content set is displayed in [SDI LINK SETTINGS].
Setting [RESOLUTION] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4) Press as to select [RESOLUTION], and press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
5) Press as to select an item, and press the <ENTER> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1035i], [1920x1080i], [1920x1080p],
[1920x1080sF], [2048x1080p], or [2048x1080sF] when [SINGLE LINK SETTING] is selected.
f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], [2048x1080p], [2048x1080sF], [3840x2160p],
or [4096x2160p] when [DUAL LINK SETTING] is selected.
f Select [AUTO], [3840x2160p], [3840x2160sF], [4096x2160p], or [4096x2160sF] when [QUAD LINK
SETTING] is selected.
Setting [4K DIVISION] in [SDI IN]
Set the transmission method in the 4K format when displaying the 4K image with dual link or quad link.
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
4) Press as to select [4K DIVISION].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[SQUARE]
[INTERLEAVE]
Setting [3G-SDI MAPPING] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4) Press as to select [3G-SDI MAPPING].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [SQUARE] or [INTERLEAVE].
[SQUARE] or [INTERLEAVE] is automatically selected by reading the payload ID attached to the
input signal.
Fixes the transmission method to Square Division.
Fixes the transmission method to 2-Sample Interleave Division.
ENGLISH - 107