Srgb-Compliant Video - Panasonic PT-RQ13K Operating Instructions Manual

f The selection item for the input signal to the <DVI-D IN 3> terminal and the <DVI-D IN 4> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 2>.
f For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SDI IN] (x page 106).

sRGB-compliant video

sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 101).
2) Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 81).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
88 - ENGLISH
Chapter 4 Settings — [PICTURE] menu