Panasonic PT-RQ13K Operating Instructions Manual page 115

3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4) Press as to select [SIGNAL LEVEL].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
Setting [EDID SELECT] in [SLOT IN] (DVI-D input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [EDID SETTING], and press the <ENTER> button.
f The [EDID SETTING] screen is displayed.
4) Press as to select [EDID SELECT].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
Note
f The data for Plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 210) for a resolution that
supports plug and play.
Setting [EDID MODE] in [SLOT IN] (DVI-D input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [EDID SETTING], and press the <ENTER> button.
f The [EDID SETTING] screen is displayed.
4) Press as to select [EDID MODE].
5) Press the <ENTER> button.
f The [DVI-D EDID MODE] screen is displayed.
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the DVI-D terminal output of the external device (such as computer) is input to
the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the <DVI-D IN 3> terminal, or the <DVI-D IN
4> terminal.
Select this item when the HDMI terminal output from the external device (such as Blu-ray disc player)
is input to the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the <DVI-D IN 3> terminal, or the
<DVI-D IN 4> terminal via a conversion cable, etc.
Recognizes moving image signals and still image signals automatically.
Select this item mainly when the external device (such as Blu-ray disc player) which outputs the
moving image signal is connected to the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the
<DVI-D IN 3> terminal, or the <DVI-D IN 4> terminal.
Select this item mainly when the external device (such as computer) which outputs the still image
signal is connected to the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the <DVI-D IN 3>
terminal, or the <DVI-D IN 4> terminal.
ENGLISH - 115