[Geometry] - Panasonic PT-RQ13K Operating Instructions Manual

3) Press as to select [MODE].
4) Press qw to switch the item.
[INTERNAL]
[FULL]
5) Press as to select [INTERLOCKED].
6) Press qw to switch the item.
[OFF]
[ON]
7) Press as to select [VERTICAL] or [HORIZONTAL].
f If [ON] is selected, select [BOTH].
8) Press qw to adjust.
Note
f When [ASPECT] is not set to [DEFAULT], [MODE] is not displayed.
f Zoom ratio less than 100 cannot be set when the video signal fulfilling one of the following conditions is being input.
g Video signal with resolution exceeding 1 920 x 1 200 dots
g Video signal with dot clock frequency exceeding 162 MHz

[GEOMETRY]

You can correct various types of distortion in a projected image.
Unique image processing technology enables projection of a square image on a special screen shape.
1) Press as to select [GEOMETRY].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[KEYSTONE]
[CORNER CORRECTION]
[CURVED]
[PC-1]
*1
[PC-2]
*1
[PC-3]
*1
*1 Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Up to three geometric adjustments
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press as to select [GEOMETRY].
2) Press qw to select [KEYSTONE] or [CURVED].
3) Press the <ENTER> button.
f The [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED] screen is displayed.
4) Press as to select the item to adjust.
5) Press qw to adjust.
[LENS THROW RATIO]
Set the throw ratio for the lens used.
Chapter 4 Settings — [POSITION] menu
Enlarges the size within the aspect range set with [SCREEN FORMAT].
Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].
Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the
same magnification.
Does not perform geometric adjustment.
Adjusts any trapezoidal distortion in the projected image.
Adjusts any distortion in the four corners of the projected image.
Adjusts any curved distortion in the projected image.
Performs geometric adjustment using a computer.
[KEYSTONE]
ENGLISH - 91