Table of Contents
Advertisement
Network Speed Dome User Manual
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
8. Click
alarm, Notify surveillance center, send email, upload to FTP, trigger channel,
smart tracking and trigger alarm output are selectable. Please Step 3 in Section
5.2.1 Configuring Motion Detection.
9. Click
5.4 PTZ Configuration
5.4.1 Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset
freezing, preset speed, etc.
1. Enter the Basic PTZ Parameter Configuration interface:
Configuration > PTZ > Basic Settings
Figure 5-29 Basic PTZ Configuration Interface
tab to select the linkage method taken for the video loss
button to save the settings.
71
Advertisement
Table of Contents
