Configuring Alarm Output - HIKVISION DS-2DF8836IX-AEL User Manual

Network Speed Dome User Manual
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
5. Click
alarm, including Notify surveillance center, send email, trigger channel, smart
tracking and trigger alarm output are selectable. Please Step 3 in Section 5.2.1
Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative
checkbox and select the No. to enable Preset Calling, Patrol Calling or Pattern
Calling.
7. You can copy your settings to other alarm inputs.
8. Click

5.2.5 Configuring Alarm Output

Steps:
1. Enter the Alarm Output Settings interface:
Configuration> Event > Basic Event > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list.
3. Set a name in
output (optional).
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
5. Click
tab to select the linkage method taken for the video loss
to save the settings.
Figure 5-20 Linkage Method
tab to enter the arming schedule setting interface. The
60
for the alarm