HIKVISION DS-2DF8836IX-AEL User Manual page 57

Network Speed Dome User Manual
(5) Click
The time of each period cannot be overlapped. Up to 8 periods can be
configured for each day.
5. Set the Alarm Actions for Motion Detection.
Click
You can specify the linkage method when an event occurs. The following
contents are about how to configure the different types of linkage method.
Check the checkbox to select the linkage method. Notify surveillance center,
send email, upload to FTP, trigger channel and trigger alarm output are
selectable.
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
 Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to refer to Section 0
Configuring Email Settings to set the Email parameters.
 Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
You need a FTP server and set FTP parameters first. Refer to Section 0
to save the settings.
tab to enter the Linkage Method interface.
Figure 5-16 Linkage Method
56