Table of Contents
Advertisement
Network Speed Dome User Manual
time schedule configuration is the same as the settings of the arming schedule
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
6. You can copy the settings to other alarm outputs.
7. Click
5.2.6 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 in Section 5.2.1 Configuring Motion Detection.
Figure 5-21 Alarm Output Settings
to save the settings.
61
Advertisement
Table of Contents
