HIKVISION DS-2DF8836IX-AEL User Manual page 37

Network Speed Dome User Manual
2. Use the PTZ control buttons to move the lens to the desired position.
 Pan the speed dome to the right or left.
 Tilt the speed dome up or down.
 Zoom in or out.
 Refocus the lens.
3. Click to finish the setting of the current preset.
4. Edit a preset name by double clicking on the default name such as preset 1. (The
pre-defined presets are named already and not configurable. Please refer to the
user manual for detailed function description.)
5. You can click
You can configure up to 300 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
For convenient preset selection, refer to the following steps to navigate to the preset
you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call
Figure 4-7 Setting a Preset
to delete the preset.
Figure 4-8 Calling a Preset
36
to call the