Table of Contents
Advertisement
Network Speed Dome User Manual
2. Set the RS-485 parameters and click
The Baudrate, PTZ Protocol and PTZ Address parameters of the speed dome
should be exactly the same as those of the control device.
Configuring DST (Daylight Saving Time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period
of a year, you can turn this function on. The time will be adjusted automatically when
the Daylight Saving Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > System > System Settings > DST
2. Check
3. Set the date of the DST period.
4. Click
Figure 6-43 RS-485 Settings
to enable the DST function.
to save the settings.
Figure 6-44 DST Settings
116
to save the settings.
Advertisement
Table of Contents
