HIKVISION DS-2DF8836IX-AEL User Manual page 29

Network Speed Dome User Manual
2. Configure the following settings:
Live View Parameters: Set the protocol type, stream type, image size and live

view performance.
 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality, yet
the real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
HTTP: Allows the same quality as of TCP without setting specific ports for
streaming under some network environments.
MULTICAST: It's recommended to select the protocol type to Multicast when
using the Multicast function. For other information about Multicast, refer to
Section 0 Configuring TCP/IP Settings.
 Live View Performance: Set the live view performance to Shortest Delay or
Auto.
 Rules: You can enable or disable the rules of dynamic analysis for events here.
 Image Format: The captured pictures can be saved as different format. JPEG
and BMP are available.
Record File Settings: Set the saving path of the video files.

 Record File Size: Select the packed size of manually recorded and downloaded
video files. The size can be set to 256M, 512M or 1G.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files
in
Picture and Clip Settings: Set the saving paths of the captured pictures and

clipped video files.
 Save snapshots in live view to: Set the saving path of the manually captured
pictures in
 Save snapshots when playback to: Set the saving path of the captured
Figure 4-2 Local Configuration Interface
interface.
interface.
28