Operating Ptz Control; Ptz Control Panel - HIKVISION DS-2DF8836IX-AEL User Manual

Network Speed Dome User Manual
 Click the
on the toolbar to enter the regional focus operation mode and the
icon turns into
image as the desired focus region.
 Click
to display the
volumn.
 Not all the speed dome models support the above functions. Please take the
browser interface of the actual product as standard.
 Before enabling the two-way audio or recording with audio functions, please set
the Stream Type to Video & Audio referring to Section 6.4.1 Configuring Video
Settings.
Please refer to the following sections for more information:
 Configuring remote recording in Section 5.1 Storage Settings
 Before you start:
To configure record settings, please make sure that you have the network storage
device within the network or the storage card has been inserted in the corresponding
card slot. Refer to the installation guide for the location of the storage card slot.
 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 4.2 Configuring Local
Parameters and Section 6.2.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.3.2 Configuring OSD Settings.

4.5 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to control panning,
tilting and zooming.

4.5.1 PTZ Control Panel

On the live view page, click
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
. Then click-and-drag the mouse to draw a rectangle on the
to show the PTZ control panel or click
. Drag the slider to adjust the
32
to hide it.