Ptz Configuration; Configuring Basic Ptz Parameters - HIKVISION DS-2DE1A400IW-DE3 User Manual

User Manual of Network PTZ Camera

5.4 PTZ Configuration


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on different camera models.

5.4.1 Configuring Basic PTZ Parameters

You can configure the basic PTZ parameters, including proportional pan, preset freezing, preset
speed, etc.
1. Enter the Basic Settings interface:
Configuration > PTZ > Basic Settings
2. Configure the following settings:
 Basic Parameters: Set the basic parameters of PTZ.

Proportional Pan: If you enable this function, the pan/tilt speeds change according to
the amount of zoom. When there is a large amount of zoom, the pan/tilt speed will be
slower for keeping the image from moving too fast on the live view image.

Preset Freezing: This function enables the live view to switch directly from one scene
© Hikvision
to show the PTZ control panel or click
Figure 5-26 Basic Settings
56
to hide it.