Table of Contents
Advertisement
Network Speed Dome User Manual
arming schedule configuration is the same as the setting of the arming schedule
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
5. Click
alarm, including Notify surveillance center, send email, trigger channel, smart
tracking and trigger alarm output are selectable. Please refer to Step 3 in Section
5.2.1 Configuring Motion Detection.
6. Click
5.2.4 Configuring Alarm Input
Steps:
1. Enter the Alarm Input Settings interface:
Configuration > Event > Basic Event > Alarm Input
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed).
3. Edit the name in
the alarm input (optional).
4. Click
arming schedule configuration is the same as the setting of the arming schedule
tab to select the linkage method taken for the video loss
to save the settings.
Figure 5-19 Alarm Input Settings
tab to enter the arming schedule setting interface. The
59
to set a name for
Advertisement
Table of Contents
