Table of Contents
Advertisement
Network Speed Dome User Manual
4.5.4 Setting/Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from the list and click
3. Click
to enter the adding interface of preset, as shown in Figure 4-10.
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click OK to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click OK to save all the patrol settings.
Calling a Patrol:
In the PTZ control panel, select a defined patrol from the list and click
patrol, as shown in Figure 4-11.
to enter the patrol settings interface.
Figure 4-10 Adding Presets
Description
It is the duration staying on one patrol point. The speed
dome moves to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
.
38
to call the
Advertisement
Table of Contents
