Safety Information - Fluke 1735 Getting Started

Safety Information

In this manual, a Warning identifies conditions and actions that pose hazard(s)
to the user. A Caution identifies conditions and actions that may damage the
Logger or the test instruments.
800.561.8187
To prevent possible electrical shock or personal
injury, follow these guidelines:
•
Follow all safety instructions.
•
Adhere to local and national safety codes.
Individual protective equipment must be used to
prevent shock injury where hazardous live
conductors are exposed.
•
The Logger may only be used and handled by
qualified personnel.
•
Remove all test leads from the Logger before you
open the battery door. Open the Logger only to
replace the rechargeable battery.
•
Maintenance work must be done only by qualified
service personnel.
•
Use only specified current probes. If you use
flexible current probes, wear suitable protective
gloves or work on de-energized conductors.
•
Protect the Logger against dampness, wetness,
and humidity.
•
Always connect voltage and current test leads to
the Logger before connecting to the load.
•
The plug and socket connection for the voltage
lead set is designed for 600 V CAT III. The
maximum voltage between outer conductor and
earth potential must not exceed 600 V. With multi-
phase connections, phase-phase voltage may not
exceed 800 V.
•
Use only the provided original or specified
accessories. This includes the ac power adapter.
www.
XW Warnings
.com
Power Logger
Safety Information
information@itm.co
3