Programming Procedure; Program Example - Mitsubishi Electric NZ2GFCE-60DAV8 User Manual

8.2
Create a program to execute D/A conversion as illustrated by the following procedure.
1.
Parameter settings
Page 42 Parameter Settings
2.
Auxiliary program (error reset program) creation
*1 A program to be added depending on the details of control (to be created as needed)
8.3
System configuration
(1)
(1) Master station (station No.0)
• Power supply module: Q62P
• CPU module: Q10UDHCPU
• Master/local module: QJ71GF11-T2 (start I/O number: 0000H to 001FH)
• Input module: QX10 (start I/O number: 0020H to 002FH)
(2) Remote device station (station No.1)
• D/A converter module (NZ2GFCE-60DAV8)
For the settings using the engineering tool, the procedure is described based on the use of GX Works2.
8 PROGRAMMING
78

8.2 Programming Procedure

Downloaded from ManualsNet.com
Programming Procedure

Program Example

(2)
search engine
*1