Table of Contents
Advertisement
CHAPTER 1
This chapter describes the basic procedure for programming.
Check column
1.1
System Configuration Example
The following system configuration is used for description throughout this chapter.
GX Works2
*
Wiring of the power supply module and I/O modules are omitted in this illustration.
26
BASIC PROCEDURE FOR
PROGRAMMING
Start
Creating projects
Creating programs
Converting programs
Writing projects
Checking operations
Saving projects
End
CPU module (Q03UDCPU)
Power supply module (Q62P)
USB connection
Create projects with GX Works2.
Page 27, Section 1.2
(
)
Create programs.
Page 28, Section 1.3
(
)
Convert created programs into ones that can be
processed by the CPU module.
Page 30, Section 1.4
(
)
Write the projects to the CPU module.
For the first use of the CPU module,
format the memory beforehand.
Page 30, Section 1.5
(
)
Debug the programs using the monitoring function.
Page 32, Section 1.6
(
)
Save the projects.
Page 34, Section 1.7
(
)
Input module (QX42)
Output module (QY42P)
Advertisement
Table of Contents
