Mitsubishi Electric NZ2GFCE-60DAV8 User Manual page 69

Resetting a check code
The check codes can be reset by either of the following two methods.
• Write a digital value within the setting range, and turn on and off Error clear request flag (RYA).
• Turn on and off Initial data setting request flag (RY9).
When the scaling function is enabled
When Scaling enable/disable setting (address: 0118H) is set to Enable (0), the scale-converted digital value is the target for
the check code.
When the scale-converted digital value is out of the setting range, a slight inaccuracy may be contained in the
target digital value for the check code when the check code is stored due to an operational error in the scale
conversion.
When the shift function is enabled
When a value is set for CH Shifting set value (RWw10 to RWw17), the value with the shifting set value added is the target
for the check code.
Downloaded from ManualsNet.com search engine
7 FUNCTIONS
7.10 Digital Value Range Check Function
7
67