Chapter 7 Operation Examples; Programming Procedure; Program Examples - Mitsubishi Electric Melsec iQ-R60AD8-G User Manual

7
OPERATION EXAMPLES
This chapter describes the programming procedure and the basic program of the A/D converter module.
7.1

Programming Procedure

Take the following steps to create a program for running the A/D converter module:
1.
Set parameters.
Page 30 Parameter settings
2.
Create a program.
Page 32 Program examples
Using function blocks (FBs) reduces load at programming and improves the readability of programs. For
details on the function blocks, refer to the following.
 MELSEC iQ-R Analog-Digital Converter Module/Digital-Analog Converter Module Function Block
Reference
7.2

Program Examples

System configuration
The following figure is an example of the system configuration.
(1)
(1) Power supply module (R61P)
(2) CPU module (R120CPU)
(3) A/D converter module (R60AD8-G)
(4) Input module (RX10)
(2) (3) (4)
7 OPERATION EXAMPLES
7.1 Programming Procedure
7
29