Table 23. USB specifications (continued)
System
NIC ports
The PowerEdge R640 system supports four Network Interface Controller (NIC) ports on the back panel, which are available in the
following configurations:
•
Four RJ-45 ports that support 10, 100 and 1000 Mbps
•
Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
•
Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 Gbps
•
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
•
Four SFP+ ports that support up to 10 Gbps
•
Two SFP28 ports that support up to 25 Gbps
NOTE:
You can install up to three PCIe add-on NIC cards.
NOTE:
The NDC slot is not hot-pluggable.
Serial port
The PowerEdge R640 system supports one serial port on the back panel. This port is a 9-pin connector, Data Terminal Equipment (DTE),
16550-compliant.
NOTE:
The Serial port is not hot-pluggable.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R640 system supports one 15-
pin VGA port on the front and back of system.
NOTE:
The VGA ports are not hot-pluggable.
Video specifications
The PowerEdge R640 system supports integrated Matrox G200eW3 graphics controller with 16 MB of video frame buffer .
Table 24. Supported video resolution options
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1440 x 900
1920 x 1200
36
Technical specifications
Front panel
One 5-pin micro USB 2.0
management port
Refresh rate (Hz)
60, 70
60, 75, 85
60, 75, 85
60, 75, 85
60, 75
60
60
Back panel
N/A
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Internal
N/A