Nic Indicator Codes - Dell EMC E39S Series Installation And Service Manual

Table 12. 2 X 2.5-inch drive system with 2 PCIe expansion slot (continued)
Item
3
4
5
6
7
8
9

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED indicator
indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 10. NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
20 Dell EMC PowerEdge R640 overview
Ports, panels, or slots
NIC port (4)
USB 3.0 port (2)
VGA port
Serial port
iDRAC9 dedicated network port
System status indicator cable
port
System identification button
Icon
N/A
Description
The NIC ports that are
integrated on the network
daughter card (NDC) provide
network connectivity. For more
information about the supported
configurations, see the
Technical specifications section.
The USB ports are 9-pin and
3.0-compliant. These ports
enable you to connect USB
devices to the system.
Enables you to connect a display
device to the system. For more
information, see the Technical
specifications section.
Enables you to connect a serial
device to the system. For more
information, see the Technical
specifications section.
Use the iDRAC9 dedicated
network port to securely access
the embedded iDRAC on a
separate management network,
see the www.dell.com/
poweredgemanuals
Enables you to connect the
status indicator cable and view
system status when the CMA is
installed.
The System Identification (ID)
button is available on the front
and back of the systems. Press
the button to identify a system
in a rack by turning on the
system ID button. You can also
use the system ID button to
reset iDRAC and to access BIOS
using the step through mode.