Dell EMC E39S Series Installation And Service Manual page 15

Table 6. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
iDRAC Quick Sync 2 indicators
Table 7. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and
then turns off
Solid amber
Blinking amber
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Condition
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specific error
messages. For information about the event and error messages
generated by the system firmware and agents that monitor system
components, go to qrl.dell.com
error code, and then click Look it up..
Corrective action
If the LED fails to turn on, reseat the left control
panel flex cable and check. If the problem persists,
see the Getting help
If the LED fails to turn off, restart the system. If the
problem persists, see the
If the indicator continues to blink indefinitely, see the
Getting help
If the indicator continues to blink indefinitely, see the
Getting help
Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help
poweredgemanuals
Administrator User's Guide at
openmanagemanuals.
Restart the system. If the problem persists, see the
Getting help
Restart the system. If the problem persists, see the
Getting help
Dell EMC PowerEdge R640 overview
> Look Up > Error Code, type the
section.
Getting help section.
section.
section.
section. www.dell.com/
or Dell OpenManage Server
https://www.dell.com/
section.
section.
15