Dell EMC E39S Series Installation And Service Manual page 48

Option Description
Integrated Devices Provides options to manage integrated device controllers and ports, specifies related features and options.
Serial Provides options to manage the serial ports, their related features and options.
Communication
System Profile Provides options to change the processor power management settings, and memory frequency.
Settings
System Security Provides options to configure the system security settings, such as system password, setup password, Trusted
Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the system.
Redundant OS Sets the redundant OS information for redundant OS control.
Control
Miscellaneous Provides options to change the system date and time.
Settings
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and BIOS version.
Viewing System Information
To view the System Information screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
Option Description
System Model Specifies the system model name.
Name
System BIOS Specifies the BIOS version installed on the system.
Version
System Specifies the current version of the Management Engine firmware.
Management
Engine Version
System Service Specifies the system Service Tag.
Tag
System Specifies the name of the system manufacturer.
Manufacturer
System Specifies the contact information of the system manufacturer.
Manufacturer
48 Pre-operating system management applications