Parameter And Input/Output Check (Mode Tests) - DeDietrich DTGE130-35 Eco.NOxPlus Technical Instructions

12.4 Parameter and input/output check (mode tests)

Press
#PARAMETERS
10 seconds then
PERMUT
STAGE
NB.CASC.:
POWER %
SPEED B.(RPM)
CONS.RPM
MEAN OUTSIDE T
CALC.T. BOILER
BOILER. T.
CALC.T.CASC**
CASCADE TEMP.**
CALCULATED T. A
CALCULATED T. B*
OUTLET TEMP. B
CALCULATED T. C*
OUTLET TEMP. C
KNOB A*
KNOB B*
KNOB C*
OFFSET ADAP A*
OFFSET ADAP B*
OFFSET ADAP C*
#DEF. HISTORY
then
1 FAIL...
...
10 FAIL...
#TEST OUTPUTS
then
BURNER : YES/NO
AUX.CIR.P : YES/NO
DHW PUMP : YES/NO*
P.CIRC.A : YES/NO
OP. 3WVB: YES/NO*
CLOSE V3WB: YES/NO*
P.CIRC B : YES/NO*
OPEN 3WV C: YES/NO*
CLOSE V3W C: YES/NO*
P.CIRC. C: YES/NO*
* The line or title is only displayed for the options, circuits or
sensors actually connected.
** The line is only displayed for boiler 1.
15/02/2011 - 300014279-001-J
Display
Cascade permutation status (1 = permutation 1-2, 2 = permutation 2-1)
Current speed (Number of boilers requesting heating)
Number of boilers recognised in the cascade
Temporary output % (0 % = Minimum output or burner off)
Fan speed (Measured values)
Instruction set fan rpm
Average outside temperature
Temperature calculated by the boiler
Measured boiler temperature
Calculated temperature cascade outlet
Measured temperature cascade outlet
Calculated temperature for circuit A
Calculated temperature for circuit B
Measured start temperature B
Calculated temperature for circuit C
Measured start temperature C
Position of temperature setting button on room sensor A
Position of temperature setting button on room sensor B
Position of temperature setting button on room sensor C
Parallel trigger calculated for circuit A
Parallel trigger calculated for circuit B
Parallel trigger calculated for circuit C
Failure history
Failure memorised + day, month and time of the failure
Failure memorised + day, month and time of the failure
Stop/start burner
On/Off auxiliary outlet
Stop/start domestic hot water pump
Stop/start pump circuit A
Open/Close valve circuit B
Close/Stop valve circuit C
Stop/start pump circuit B
Open/Close valve circuit C
Close/Stop valve circuit C
Stop/start pump circuit C
DTG(E)130 - 35/45/65/90/115 Eco.NOxPlus
Output or input parameter status
12. Installer settings
63