Table of Contents
Advertisement
11 "User" settings
Page scrolling
Line scrolling
Back to the title or the previous line
Enter (per 1/2 hour) the comfort temperature period or tank load enabled (dark area)
Enter (per 1/2 hour) the reduced temperature period or tank load disabled (light area)
Return key
11.1 Measurements
The #MEASURES paragraph is used to read the measurements of the connected sensors..
Press
#MEASURES
BOILER TEMP.
then
OUTLET TEMP. B*
OUTLET TEMP. C*
CASCADE TEMP.*
WATER TEMP.*
ROOMTEMP. A*
SWIMMING P. T.*
ROOMTEMP. B*
ROOMTEMP. C*
OUTSIDE TEMP.
SMOKE TEMP.*
BACK TEMP
STOR.TANK.TEMP*
SPEED B.(RPM)
POWER
CURRENT (uA)
NB IMPULS.
RUNTIME
IN 0-10V
CTRL
*
The line or paragraph is only displayed by the connected
circuits or sensor options.
15/02/2011 - 300014279-001-J
Key for access to setting and measurements
Programming keys
Display
Allows the values below to be read
Boiler water temperature
Water temperature in circuit B
Water temperature in circuit C
Cascade temperature
Tank water temperature
Ambient temperature A
Pool temperature
Ambient temperature B
Ambient temperature C
Outside temperature
Flue gas temperature
Return temperature
Hot water storage tank temperature
Display of the fan speed
Display of the current boiler output (%) (0% = Pmin or Stop, 100% = Pmax)
Ionization current
Number of burner start-ups (not restartable)
Number of burner operation hours (not restartable)
Voltage at input 0-10 V
Information reserved for the technician
DTG(E)130 - 35/45/65/90/115 Eco.NOxPlus
Parameter set
At the end of the intervention, the data is memorised after 2
minutes or by pressing the AUTO key.
11. "User" settings
47
Advertisement
Table of Contents
