Table of Contents
Advertisement
7 Maintenance
7
Maintenance
7.1
General instructions
7.2
Configuring the maintenance message
Tab.40
Type of access
Direct access: from the main home screen
Access: from any screen
Type of notification:
None
Custom notification
7.3
Maintenance instructions
30
CFU
Maintenance operations are important for the following reasons:
To guarantee optimum performance;
Extend the boiler's service life;
To provide an installation which offers the customer optimum comfort
over time.
Caution
Have an inspection carried out and the flues swept at least once a
year or more, depending on the regulations in force in your
country.
Caution
To enjoy warranty cover, no modifications must be made to the
boiler.
Caution
Failure to service the appliance voids the warranty.
The control panel is used to display a message whenever maintenance is
necessary.
1. Go to the menu: View service reminder.
Access path
Not available
→ Press the
→ Select:
Installer
→ Select: View service reminder
2. Select the desired type of notification:
Description
No maintenance message
The maintenance message is displayed after the number of boiler operating hours.
3. Select: Custom notification
4. Select Service hours mains (AP011) to set the operating hours before
a maintenance notification is issued.
5. Go back to the main screen by pressing the back key
7.3.1
Check the hydraulic pressure
1. Checking the hydraulic pressure in the installation.
2. If the hydraulic pressure is less than 0.08 MPa (0.8 bar), top up the
level of water in the heating installation so that the hydraulic pressure
is between 0.15 and 0.2 MPa (1.5 and 2.0 bar).
3. Carry out a visual check for any water leaks.
7.3.2
Topping up the installation with water
1. Open the valves on all radiators connected to the heating system.
2. Set the room thermostat to as low a temperature as possible.
3. Put the boiler in shut-down/frost protection mode.
key
.
7740500 - v02 - 12022021
Advertisement
Table of Contents
