Table of Contents
Advertisement
4. Control panel
4 Control panel
4.1 Electromechanical components
1
Main ON/OFF switch
Pressure gauge
2
* Depending on the model of the appliance, the pressure gauge is
manual (dial display) or automatic (pictogram display)
On light / Alarm
Green LED LIT: normal operation
3
Red LED lit: Burner in safety condition
Flashing red Led: abnormal operation (See chapter "10
Messages - Alarms")
4
Safety control box reset button
4.2 Display
1
Text and numerical display
2
Graphic display bar for the programme in circuit A, B or C
Light area: Reduced temperature heating period or tank load
3
disabled
Dark area: Comfort temperature heating period or tank load
4
enabled
5
Flashing cursor showing the current time
6
Number display (current time, adjusted values, parameters, etc.)
Active programme display, P1, P2, P3, P4
7
or
Su: automatic "Summer" cut-off
The arrows flash when setting values can be modified using the
8
+ and - keys
9
Circuit operation symbols
Opening the 3-way valve
Closing the 3-way valve
Displayed circuit pump on
Name of the circuit displayed
A, B, C
22
The panel must always be supplied with 230V voltage:
- to ensure the anti-grip of the heating pump.
Use the mode:
- "summer" to shut down the heating.
- "antifreeze" to shut down the boiler if you are to be absent.
If a remote control is connected, it will not show a display when the
main switch is in the OFF position.
See chapter Operating mode
See chapter Summer mode
10
Symbol displayed above the active operating mode
Symbols indicating that the following inputs/outputs are
11
active
Burner on
DHW load pump on
Summer mode
Not available
DTG(E)130 - 35/45/65/90/115 Eco.NOxPlus
15/02/2011 - 300014279-001-J
Advertisement
Table of Contents
