10.2.10 Using The Fixed-Speed Boiler; 10.2.11 Selecting A Heating Circuit - DeDietrich IX 245-130 Installation, User And Service Manual

10 Settings
Fig.121
18. February 2014
Tuesday
Fig.122
Controller stop function
On
Fig.123
304:Controller stop function
Controller stop setpoint
Adjust? 80%
MENU
102 IX
14:13
1.5 bar
MENU
MENU
MW-3000085-EN-02
MENU
MW-3000088-EN-02
0% 100%
MW-3000089-EN-02

10.2.10 Using the fixed-speed boiler

Using the boiler according to heat input makes it possible to calibrate the
gas valve.
The heat input corresponds to the speed of the boiler in percentage of the
nominal output.
1. From the home screen, press the
2. Select the parameter Controller stop function by turning the
button.
3. Press the button to confirm.
The parameter Controller stop function On appears.
4. Press the button to confirm.
304:Controller stop appears.
5. Press the button to modify the heat input value from 0 to 100 % by
turning the button.
6. Press the button to confirm the heat input.
Important
Press the key to return to the main display and reactivate the
MENU
control system.

10.2.11 Selecting a heating circuit

The control panel can manage up to three different heating circuits.
1. From the home screen, turn the
heating circuits available.
2. Press the button to confirm.
3. Turn the button to temporarily modify the temperature set point on
the selected heating circuit.
4. Press the button to confirm.
The selected heating circuit is active.
and keys simultaneously.
MENU
button to select one of the three
7702684 - v04 - 05092019