Table of Contents
Advertisement
4
Description of the product
4.1
General description
The boilers are compatible and preconfigured to run on F30 biofuel for France. For other countries, the settings must be
adjusted to run on standard oil.
See
See the specific paragraph in the installation manual.
The floor-standing oil boilers in the CFU range have the following specifications:
Heating only with possibility to produce domestic hot water by combining them with a domestic hot water tank
High-efficiency heating
Low polluting emissions
Heating body in cast iron
Pre-assembled and pre-set oil burner
Electronic control panel
Chimney connection: Flue gas discharge via a chimney type connection
4.2
Boiler
Fig.2
4
4.3
Control panel description
4.3.1
Control panel description
Fig.3
1
2
3
4.3.2
Description of the standby screen
7740570 - v04 - 03112022
1 Control panel
2 On/Off switch
3 Burner manual reset button
1
4 Data plate
2
3
MW-5000851-1
The control panel allows the end user, chimney sweep or installer to
configure the boiler for central heating and domestic hot water production.
1
4
2
3
4
MW-5000915-1
The standby screen is active if no key on the control panel is pressed
within 5 minutes, and the backlight will go out.
Back key
Main menu key
Display
Selector
4 Description of the product
CFU
11
Advertisement
Table of Contents
