Video System Selection - Eiki LC-WB200W Owner's Manual

Video Input
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the SELECT button.
2
Use the Point ▲▼ buttons to select Video,
S-video or Computer 1(Component) and
then press the SELECT button.
3
Use the Point ▲▼ buttons to select System
and then press the Point ► button or the
SELECT button. Use the Point ▲▼ buttons
to select the desired system and then press
the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming
video system, and adjusts itself to optimize its
performance. When Video System is PAL-M or
PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M and PAL-N.
Component
Auto
The projector automatically detects an incoming
video signal, and adjusts itself to optimize its
performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, 480p, 575p, 720p,
1035i and 1080i.
Note:
The AV System Menu cannot be selected when
selecting RGB(Scart) or HDMI.
38
Video System Selection
AV System Menu (Video or S-video)
AV System Menu (Component)