Image Mode Selection - Eiki LC-WB200W Owner's Manual

Computer Input
Direct Operation
Select the desired image mode among
Dynamic, Standard, Real, Cinema,
Blackboard (Green), Colorboard, Image 1,
Image 2, Image 3 and Image 4 by pressing the
IMAGE button on the remote control.
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► button or the SELECT
button.
2
Use the Point ▲▼ buttons to select the
desired item and then press the SELECT
button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for
graphics.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Image 1-4
For viewing with the user preset image mode
in the Image Adjust Menu (see page 33).
32
Image Mode Selection
Remote control
Image select Menu
IMAGE button
IMAGE button
Dynamic
Standard
Real
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4