Eiki LC-WB200W Owner's Manual page 49

HDMI setup
This function is only used for HDMI input source.
Image
Select Normal or Enhanced to match the
video range setting of your HDMI Digital
RGB equipment.
Sound
HDMI: When using the HDMI cable, select
HDMI.
Both video and audio are
transferred and you need not to
connect any additional cables for
audio.
Computer 2: When using the DVI-HDMI cable,
select Computer 2 and connect
the audio cable to COMPUTER IN
2 termimal.
The names for the output setting of Digital RGB
vary from equipment to equipment. For details,
refer to the owner's manual of your Digital RGB
equipment.
When the black parts of the image are
destroyed or stand out, please switch to
Normal or Enhanced, and then switch the
output type of the HDMI Digital RGB output
equipment.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal
on the back of the projector is switchable for
computer input or monitor output (p.9). Select
Computer 2 or Monitor out with the Point ▲▼
buttons.
Computer 2 ....... computer input
Monitor out ........... monitor out
Terminal function is not available when
selecting Computer 2 to the input source.
Change the input source to the others
(Computer 1, and so on) so that the Terminal
function will be available. (pp. 25, 27, 37)
HDMI setup
Setting
49