Eiki LC-WB200W Owner's Manual page 48

Setting
Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄► buttons to fix the number
and move the red frame pointer to the next
box. The number changes to . If you fixed an
incorrect number, use the Point ◄► buttons
to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to Set. Press the SELECT button so that
you can start to operate the projector.
If you entered an incorrect Logo PIN code, Logo
PIN code and the number () will turn red
for a moment. Enter the correct Logo PIN code
all over again.
Change the Logo PIN code lock setting
Use the Point ▲▼ buttons to switch On or Off,
and then press the SELECT button to make a
choice.
Logo PIN code change
Logo PIN code can be changed to your desired
four-digit number. Press the SELECT button to
select Logo PIN code change. Current logo
PIN code dialog box appears, use the Point
▲▼buttons to enter the current code. The New
logo PIN code input dialog box appears. Set a
new Logo PIN code, confirmation box appears,
choose Yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep
it on hand. If you lost the number, you could no
longer change the Logo PIN code setting.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE IN
COLUMN OF THE LOGO PIN CODE NO. MEMO
ON PAGE 78 , AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
48
Enter a Logo PIN code
After a correct Logo PIN code
is entered, the following dialog
box appears.
Change the Logo PIN code lock setting
Change the Logo PIN code