Video Input; Video System Selection - Eiki LC-WXL200 Owner's Manual

1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Input and then press the Point
► or the SELECT button.
2
Use the Point ▲▼ buttons to select System and then press the
Point ► or the SELECT button.

Use the Point ▲▼ buttons to select the desired system and
then press the SELECT button.
Video jack or S-video jack
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4 .4, PAL-M, and PAL-N.
y, Pb/Cb, Pr/Cr jacks
Auto
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 105i, 100i or 100p, select the
system manually.
y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 40i, 575i,
40p, 575p, 720p, 105i, 100i, and 100p.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Video Input
Video System Selection
AV System Menu (Video or S-video)
AV System Menu (y, Pb/Cb, Pr/Cr)
45