Remote Control Operation - Eiki LC-WB200W Owner's Manual

Using the remote control for some frequently used operations is advisable. Just pressing one of the
buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons
Press the COMPUTER 1/2, HDMI, VIDEO,
S-VIDEO and COMPONENT buttons on the
remote control to select the input source. See
pages 27, 37 for details.
FREEZE button
Press the FREEZE button on the remote control
to freeze the picture on the screen, meanwhile,
volume is muted. To cancel the Freeze function,
press the FREEZE button again or press any
other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
INFO. button
Display the input source information: Input,
H-sync freq., V-sync freq., Screen, Language,
Lamp status, Lamp counter, Power
management, Key lock, PIN code lock, Remote
control and SERIAL NO. and Total power
savings. (p.59)
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control
to enter to the Digital zoom +/– mode. See page
35 for details.
LAMP button
Press the LAMP button on the remote control
to select the lamp mode for changing the
brightness on the screen.
Auto.......Brightness according to the input
signal.
Normal..Normal brightness
Eco 1.....70%-80% of the normal brightness.
Eco 2.....50% of the normal brightness.
Remote control Operation
Remote control
COMPUTER 1/2
buttons
VIDEO
button
FREEZE
button
D.ZOOM
buttons
Note:
Basic Operation
See the next page for the description of other
buttons.
HDMI button
COMPONENT
button
S-VIDEO
button
INFO. button
LAMP button
25