Table of Contents
Advertisement
Video Input
Video System Selection
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼
2
or Computer 1(Component) and then press the
SELECT button.
Use the Point
▲▼
3
press the Point
buttons to select the desired system and then press
▼
SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
42
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Video , S-video
buttons to select System and then
or SELECT button. Use the Point
►
AV System Menu (Video or S-video)
▲
AV System Menu (Component)
HDMI
Video
S-video
Network
Wired 1
Video
Component
Advertisement
Table of Contents
